Porsche, BMW, MERCEDES, MINI COOPER, accessories, apparel,
GIFTS, WATCHES, TENAX, METRIC, BOLTS, fasteners, Turbosmart, boost controllers, waste gates, bov, blow off valves


IPD Plenum 997 Carrera


ipdplfor997c

IPD®997.1 Carrera S 3.8L Plenum
IPD®997.1 Carrera S 3.8L Plenum
The 997S IPD Plenum provide power increases throughout the entire power band. Gains of 28 horsepower and 26 foot pounds of torque are experienced in the midrange with gains of 11 to 12 hp at the peak. The "Y" design of the 3.8 liter IPD Plenum also allows for a more linear power delivery and improved throttle response that elevates the 997 S Carrera driving experience even higher. Power improvements will be fully realized once the factory DME makes all the necessary “adaptation” requirements which occurs after a series of hard pulls on the dyno or full throttle runs (at your local race track of course). The 997S IPD Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician. To be used with factory 74mm TB.


Availability: Usually ships in 2-3 business days

IPD-97174-38$795.00
IPD®997.1 Carrera 3.6L Plenum
IPD®997.1 Carrera 3.6L Plenum
The 3.6 liter Carrera produces very similar power gains as the 3.8 liter equipped S Carreras. Maximum horsepower increases of 24 to 26 take place in the midrange and gains of 10 to 12 up top. The "Y" design of the 3.6 liter IPD Plenum also allows for a more linear power delivery and improved throttle response that enhances your 997 Carrera driving experience even further. Power improvements will be fully realized once the factory DME makes all the necessary “adaptation” requirements which occurs after a series of hard pulls on the dyno or full throttle runs (at your local race track of course). The 997 IPD Plenum is a direct bolt on replacement and installation is relatively straight forward for mechanically inclined DIY customers although IPD strongly recommends all Plenum installations be performed by a trained and qualified Porsche technician. To be used with factory 74mm TB.


Availability: Usually ships in 2-3 business days

IPD-97174-36$795.00
IPD® 997.1 Turbo Intake Plenum 74mm
IPD® 997.1 Turbo Intake Plenum 74mm
Turbo customers looking to increase engine power without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum. This version of the 997 Turbo plenum utilizes the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. Beyond these performance mods we recommend upgrading to the larger 82mm IPD Turbo Plenum. The 74mm IPD Turbo Plenum is also designed to perform with the higher flowing IPD “Y” Pipe. Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.


Availability: Usually ships in 2-3 business days

IPD-97274$950.00
IPD®997.2 DFI Carrera 3.6L Plenum
IPD®997.2 DFI Carrera 3.6L Plenum
The all new specifically designed IPD 3.6L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the OE factory throttle body. The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains for Porsche driving enthusiast. The superior design of the DFI IPD Plenum provides an additional 14 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any power loses down low. Installation of the new IPD 3.6L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.


Availability: Usually ships in 2-3 business days

IPD-97482-36$950.00
IPD®997.2 DFI Carrera S 3.8L IPD Plenum
IPD®997.2 DFI Carrera S 3.8L IPD Plenum
The all new specifically designed IPD 3.8L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body. The improved IPD intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts. The superior design of the DFI IPD Plenum provides an additional 15 horsepower at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but are considerably stronger from the mid range to redline without any loses in power down low. Installation of the new IPD 3.8L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.


Availability: Usually ships in 2-3 business days

IPD-97482_38$995.00
IPD® 997.1 Turbo High Flow Y Pipe
IPD® 997.1 Turbo High Flow Y Pipe
The revolutionary 997 Turbo IPD “Y” Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos. The factory Y pipe becomes restrictive when adding substantial power gains. The IPD “Y” Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo. Bigger isn’t always better, and the IPD “Y” Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These “Y” Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine. The IPD 997 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.


Availability: Usually ships in 2-3 business days

IPD-97500$995.00
IPD®  997.1 Turbo Comp Intake Plenum 82mm
IPD®997.1 Turbo Competition Intake Plenum 82mm
Requires upgraded 82mm Porsche throttle body. Power obsessed Turbo customers looking to push the motorsport envelope a little harder would best benefit from the larger 82mm “Competition” IPD plenum fitted with a factory 997 GT3 82mm Porsche throttle body INCLUDED. The larger 82mm intake opening allows for even greater air flow to help optimize the more extreme mods such as larger turbos, intercoolers, Y Pipes and more aggressive software. This larger version Plenum is also designed to perform with the higher flowing IPD “Y” Pipe. .


Availability: Usually ships in 2-3 business days

IPD-97282A$1,275.00
IPD® 997.1 Carrera 82mm Competition Plenum
IPD® 997.1 Carrera 82mm Competition Plenum
All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Carrera upgrades the factory OE 74mm throttle body with Porsches 82mm 997 GT3 throttle body, INCLUDED. All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile


Availability: Usually ships in 2-3 business days

IPD-97182$1,175.00
IPD® 997.2 Carrera Turbo Intake Plenum
IPD® 997.2 Carrera Turbo Intake Plenum
The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 997.2 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version.The already explosive power of the 997.2 Turbo can be further increased with the new 997.2 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 997.2 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed.The 997.2 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.


Availability: Usually ships in 2-3 business days

IPD-97274-2$950.00
IPD® 997.1 Carrera GT2/RS Turbo Plenum
IPD® 997.1 Carrera GT2/RS Turbo Plenum
The new IPD 997.1 GT2 Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The already explosive power of the 997.1 GT2 can be further increased with the new 997.1 GT2 IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the GT2 is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Max horsepower is over 30 at the wheels while the torque is slightly stronger coming in around 35 at the wheels. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed. The 997.1 GT2 Plenum delivers smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The GT2 Plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience


Availability: Usually ships in 2-3 business days

IPD-97274-GT2-RS$950.00
IPD® 997.2 Carrera DFI Hi-Flow Y Pipe
IPD® 997.2 Carrera DFI Hi-Flow Y Pipe
The revolutionary 997.2 Turbo IPD "Y" Pipe was built for the more demanding Turbo performance customer. This is not a cast reproduction of the factory Y pipe but a complete re-design from scratch, developed to deliver even greater air flow for both stock AND highly modified Turbos. The factory Y pipe becomes restrictive when adding substantial power gains. The IPD "Y" Pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 more cfm than the factory Y pipe delivering the additional power needed to raise the performance bar on any Turbo. Bigger isn't always better, and the IPD "Y" Pipe is designed to deliver optimum flow without being too large causing a loss in boost response. These "Y" Pipes can also be special ordered in custom powder coated colors and ceramic coatings or polished to improve the aesthetic appeal of your Turbo engine. The IPD 997.2 Turbo Y Pipe is designed to be a direct replacement of the factory OEM Y Pipe. There are no modifications or fabrication required for installing the IPD Y Pipe. This is an easy and straight forward R & R (remove and reinstall) bolt on upgrade.


Availability: Usually ships in 2-3 business days

IPD-97501$995.00



ecommerce provided by Yahoo! Small Business



Security Verified