Boxster/Cayman/996/997 CR or CDR Radio Removal Tool Set This radio removal tool set will work for any CR or CDR radio in a Boxster, Cayman, 996 or 997.
Factory Tool P9230 - CO Adjustment Tool for 928
Factory tool used to adjsut the CO level on 928s.
Factory Tool P-9574 - 911 Belt Tensioner Gauge
Factory tool used to properly tension the cooling and alternator fan belts on 911s. Original Kirkit tool.
Factory Tool For Fan Belt Pulley Nut
Special tool used to R&R the fan belt pulley on 911s.
Special Spark Plug Wrench for the 911 Type 964/5
Special 16mm spark plug wrench for the 911 with XZN 10mm drive.
Factory Oil Filter Wrench For 986/987/996/997 and Cayenne S & Turbo
This Porsche factory oil filter wrench will remove all the anxieties about DIY oil filter change on your Boxster, Carrera or Cayenne (except V6). Genuine Porsche tool - Made In Germany. NOT SUITABLE FOR GEN II VEHICLES
Factory Tool P202 - Cam Socket
This Porsche factory tool is used for the holding and rotating of the camshaft on 911/914s. It is used in conjunction with tool P203 - 46MM Crowfoot Socket.
Note: this tool currently on back order. Orders are being accepted for shipment as soon as available.
Equivalent to Factory Tool P203 - 46MM Crowfoot Socket
This equivalent Porsche factory tool is used for the removal/installation of the camshaft nut on 911/914s. It is used in conjunction with tool P202 - for turning and holding the camshaft
Factory Tool P207 - Dial Gauge Holder
This Porsche factory tool is used for the adjustment of cam timing on 911s
Factory Tool P208B - Spanner Wrench
This Porsche factory tool is used to hold the fan pulley on 911s.
Factory Tool P213B – Valve Adjustment Gauge
This Porsche factory gauge is used for ajusting valves on 911s. Come with extra blades.
Factory Tool P280B - Ball Joint Spanner
This Porsche factory tool is used for the removal/installation of the ball joint on 911s.
4-Piece Oil Line Wrench Set
Specially made oil line wrench set to remove/install all 911 and 914-6 oil lines. Correct wrench length eliminates fender clearance problems. 4 Pieces: 27, 30, 32 and 36mm.
Short-Stem Hazet® 17MM Allen 1/2" Socket Drive Use for Gear Box Drain Plug
Imported from Germany! Top quality Hazet® 1/2 Inch drive 17MM Allen socket for the gearbox drain plug. Use this socket to torque the drain plug to factory specifications.
Wurth Flex Driver
High Quality Wurth Flex Driver to remove and replace hose clamps, etc. Ideal tool for tight spots.
Available in 5mm, 6mm, 7mm or 8mm. Or select the 4 piece set, get the set of four (4) and SAVE. Select option below.
Porsche Hubcap Removal Tool
Genuine Porsche Tool used to remove factory hubcaps.
Porsche Latest Special Tool Catalog
All the Porsche special tools for all the Porsche models.