 |
 | |
|
TurboSmart e-Boost2 Electronic Boost Controller |
|
e-Boost2 is a natural
evolution of the original e-Boost. The feedback provided by the users
proved invaluable for continual development of the product with many of
the suggestions being incorporated into the final design of the
second-generation unit.
e-Boost2 puts the user
in total control of his/her turbocharger. With a host of new features
and state-of-the-art software, e-Boost2 is the one
accessory all owners of turbocharged cars should have! Easy to use, yet
sophisticated and technologically advanced, the e-Boost2
is equally at home in a street-going vehicle as it is in a top-level
racecar.
It's a tach!
e-Boost2 displays RPM
with a much greater accuracy than the common analogue tachometer!
It's a boost gauge!
With high accuracy boost and vacuum
display, e-Boost2 outperforms most analogue boost
gauges!
It's a shift light!
With an optional single or double LED
ring, e-Boost2 controls up to 2 warning/shift lights!
It's a NOS switch!
With a fully programmable auxiliary output
e-Boost2 gives you control over water spray, methanol
or nitrous injection!
It's the mother of all
Boost Controllers!
- Up to 6 alternate boost mapping
functions with specific boost mapping for FWD, RWD, AWD, Bike and
Drag racing applications.
- A specifically developed
Correction Feature eliminates boost drop-off at high RPM
- Boost levels can now be mapped
against TIME or RPM
- Special gate pressure function
eliminates wastegate creep
- Peak Hold/Max Boost Recall
function monitors the boost and RPM
- The display can be configured to
KPA, Bar or PSI
|
|
|
|
 | |
|
e-Boost2 LED RING |
|
Double LED ring. Shift/Warning lights complete with a plug-in wiring loom. Ring pictured installed on the left. Fits 60mm e-Boost2 only.
|
|
|
|
 | |
|
Dash Mounting Kit - 60mm |
| Pictured to the left installed.
|
|
|
|
 | |
|
Boost Tee |
|
DESCRIPTION: Smaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable from under the hood with an accurate, proven Detent System. Easy to install and adjust.
APPLICATION: Suits any turbocharged vehicle.
SUPPLIED WITH: Billet mounting bracket. Boost Tee Installation Guide
|
|
|
|
 | |
|
In-Cabin Boost Tee |
|
DESCRIPTION: Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a breeze. Gated System brings boost on faster.
APPLICATION: Suitable for all turbocharged vehicles.
SUPPLIED WITH: Mounting bracket, hose and all fitting hardware. In_Cabin Boost Control Installation Guide
|
|
|
|
 | |
|
Single-Stage Boost Controller |
|
DESCRIPTION: Fast boost response with a single adjustable boost level. Switch between standard and high boost on the fly. Ideal for turbo cars without factory boost controllers. High boost setting fully adjustable.
APPLICATION: Suitable for all turbocharged vehicles.
SUPPLIED WITH: All fitting hardware and a Rocket Launcher Switch. Single Stage Boost Control Installation Guide
|
|
|
|
 | |
|
Dual-Stage Boost Controller |
DESCRIPTION: Fast boost response with two adjustable boost levels. Toggle between high and low boost on the fly. Ideal replacement for factory boost controllers. Both high and low boost settings are fully adjustable.
APPLICATION: Suitable for all turbocharged vehicles.
SUPPLIED WITH: All fitting hardware and a Rocket Launcher Switch.
Dual Stage Boost Control Installation Guide
|
|
|
|
 | |
|
Rocket Launcher Switch |
| 10 Amp accessories switch as supplied with Single and Dual Stage.
Toggle switch with Aircraft style safety cover.
10-Amp single pole single throw toggle switch.
Ideal for switching driving lights, NOS kits or any other accessory.
|
|
|
|
 | |
|
Boost Controller Fitting Kit (Single Turbo) |
Suits all Turbosmart Boost Controllers. Includes everything required to install a boost controller.
Available in Red, Blue or Black.
|
|
|
|
 | |
|
Boost Controller Fitting Kit (Twin Turbo) |
This kit allows any Turbosmart boost controller to be connected to 2 wastegates. For parallel twin turbos only – not suited to sequential turbo applications. The kit contains silicon hose, clamps and fittings required to connect 2 wastegate actuators.
|
|
|
